Healthcare Backup Power
Generator Solutions for Healthcare Facilities
When lives depend on electricity, there is no margin for error. OnPoint Generators provides NFPA 110 compliant emergency power systems for healthcare facilities across Northern California and Nevada — from community clinics to major medical centers.
Trusted by Leading Healthcare Systems
Why Backup Power Is Non-Negotiable in Healthcare
A power outage in a healthcare facility is not an inconvenience — it is a life-safety emergency. Patient monitors, ventilators, surgical equipment, medication refrigeration, and electronic health records all depend on continuous electricity.
Hospitals & Medical Centers
Full-facility backup power covering life support, surgical suites, imaging equipment, and critical care units with seamless transfer.
Ambulatory Surgical Centers
Reliable standby power to protect patients mid-procedure and maintain sterile environments during grid failures.
Clinics & Urgent Care
Backup systems sized for outpatient facilities that keep diagnostic equipment, refrigerated medications, and electronic health records online.
Senior Living & Skilled Nursing
Continuous power for HVAC, medical devices, lighting, and call systems that residents depend on around the clock.
Laboratories & Blood Banks
Temperature-critical environments need uninterrupted power for refrigeration, centrifuges, and climate-controlled storage.
Pharmacies & Medication Storage
Protect temperature-sensitive medications and vaccines with backup power that activates within seconds of an outage.
Compliance You Can Count On
Healthcare facilities face some of the strictest emergency power regulations in any industry. We build compliance into every system we install and every service visit we perform.
NFPA 110 Type 10 / Level 1
Emergency power must restore within 10 seconds for Level 1 facilities. We design, install, and test systems that meet this standard every time.
Joint Commission Standards
Accredited hospitals must demonstrate reliable emergency power through documented testing and maintenance. Our service records satisfy audit requirements.
CMS Conditions of Participation
Medicare-certified facilities must maintain emergency power systems. We provide the testing protocols and documentation CMS surveyors expect.
State & Local Health Codes
California OSHPD and local health departments impose additional requirements. We stay current on jurisdiction-specific mandates so you remain compliant.
Healthcare-Specific Services
Emergency Transfer Switches
Automatic transfer switch installation and testing to ensure seamless cutover when utility power fails.
Scheduled Load Bank Testing
Regular load bank tests verify your generator can handle full facility demand — not just idle under no-load conditions.
NFPA 110 Compliance Programs
Turnkey compliance packages including monthly testing, annual load bank testing, and audit-ready documentation.
24/7 Emergency Response
When your backup power system needs urgent attention, our on-call technicians respond around the clock.
Generators for Healthcare Facilities
Standby power solutions that meet NFPA 110 and Joint Commission requirements.
Blue Star Power Systems
Blue Star JD80-03FT4
Open Basler controller + John Deere engine + Stamford alternator — Tier 4 Final compliant, no proprietary lock-in. Serviceable by any qualified tech.
80 kW standby · Diesel · Liquid-cooled
80 kW Tier 4 Final diesel standby/prime generator from Blue Star Power Systems. John Deere 4045HFG04 4.5L inline-four with SCR/DOC, DSE DCP7310 controller, 208-600V.
Blue Star Power Systems
Blue Star NG1050-01
Open Basler controller + PSI V16 engine + Stamford alternator — no proprietary lock-in. 1 MW gas class without OEM dealer dependency.
1.1 MW standby · Natural Gas / LPG · Liquid-cooled
1050 kW natural gas / LP standby generator from Blue Star Power Systems. PSI 53L V16 turbocharged-aftercooled, DSE DCP7310 controller, three-phase 480-4160V.
Caterpillar
Cat 3512B
1500 kW diesel with CAT 3512B V-12. Best resale -- retains 15-25% more than Cummins/MTU. Deepest parts network.
1.5 MW standby · Diesel · Liquid-cooled
1230-1500 kW diesel generator with Cat 3512B V-12 engine. EUI fuel system, EMCP 4.2B controller, mission-critical and standby ratings.
Caterpillar
Cat 3516
1600 kW diesel with CAT 3516 V-16. Best resale -- retains 15-25% more than competitors. ~200 US dealer network.
1.6 MW standby · Diesel · Liquid-cooled
1600 kW diesel generator with Cat 3516 turbocharged V-16 engine. Mission-critical platform for data centers, hospitals, and large industrial standby and prime power.
Cummins
Cummins C150 N6
150 kW natural gas with full Cummins vertical integration. 100% load in 10 seconds. No diesel permitting needed.
150 kW standby · Natural Gas / LPG · Liquid-cooled
150 kW natural gas/propane standby generator with Cummins QSJ8.9G 8.9L turbocharged inline-6 engine. PowerCommand control, UL 2200 listed, NFPA 110 Level 1 capable. Wet weight 1,776 kg (3,915 lbs).
Cummins
Cummins QSB7 (C200 D6)
200 kW diesel with QSB7 engine. Full Cummins vertical integration. 100% load in 10 seconds. Best cold-weather start (-40F).
200 kW standby · Diesel · Liquid-cooled
200 kW diesel commercial standby generator with Cummins QSB7 6.7L engine. The mid-range diesel workhorse for commercial and institutional facilities.
Resources & Services
Recommended Product Families
Application Engineering
Multi-brand engineering support on every project
Healthcare facilities need generators that meet NFPA 110 life-safety requirements. Our engineers match the right platform to your facility's load profile and compliance tier.
Protect Your Patients and Your Facility
OnPoint Generators has decades of experience keeping healthcare facilities compliant and operational. Let us design a backup power program for your facility.