Gillette · SPVD Series (Industrial Diesel - Volvo)

New

Gillette SPVD-3500

350 kW standby · Diesel · Liquid-cooled

350 kW stationary diesel standby generator with Volvo Penta TAD1352GE 12.8L engine. Stamford S4L1DF alternator, Basler DGC-2020 controller. Made in USA.

Standby power
350 kW
Voltage options
120/208V, 120/240V, 277/480V, 346/600V
Frequency / Phase
60 Hz · 3-phase
Engine
Volvo Penta TAD1352GE · 12.8L
EPA / Emissions
Tier 3
Alternator
Stamford S4L1D-F311
commercialhospitalhoteldata-centermunicipalindustrialcampus

Overview#

The Gillette SPVD-3500 is a 350-kilowatt stationary diesel standby generator — the mid-point of the 12.8L TAD13xx platform. The TAD1352GE produces 537 bhp from 12.8L displacement — the same block as the 300 kW SPVD-3000 and 400 kW SPVD-4000 at a different calibration. Stamford S4L1DF alternator, Basler DGC-2020 controller.

Three models, one block — the TAD13xx sweet spot#

The SPVD-3500 sits at the midpoint of the 12.8L TAD13xx range, offering a balanced combination of output, thermal margin, and fuel efficiency. The TAD1352 operates at 299 psi BMEP — 18% higher than the TAD1351 (300 kW) but 14% lower than the TAD1353 (400 kW). This means more thermal headroom than the 400 kW variant while still extracting meaningful output.

All three TAD13xx models share the same enclosure footprint (132 x 52 x 65 in open). For load growth planning, any foundation designed for the SPVD-3000 will accommodate a future upgrade to the SPVD-3500 or SPVD-4000.

Our service experience#

We service the Volvo TAD1352 on both Gillette SPVD and Blue Star VD generators. The 12.8L inline-6 is a workhorse diesel platform — reliable, well-documented, and straightforward to maintain. At 350 kW, annual load bank testing and fuel quality management are the two most impactful maintenance activities. The Basler DGC-2020 controller provides clear event logging for post-outage analysis.

Engineering specifications

Physical

Length
132 in
Width
52 in
Height
65 in
Wet weight
6,802 lb

Acoustic

Sound @ 7m, full load
80 dBA
Enclosure
Sound-attenuated

Fuel system & runtime

Fuel use @ full load
25.5 GPH

Documents & downloads

Spec sheets & manuals

Request a quote

Get pricing & lead time on the Gillette SPVD-3500

Tell us about the application — kW, voltage, application, install timeline — and we'll respond within one business day with budgetary pricing, lead time, and any sizing notes.

Estimate runtime for the Gillette SPVD-3500

Adjust load percent and tank size to estimate runtime. Pre-filled with this model's spec where available.

Estimate runtime on this tank

Estimated runtime

10.2 hours(0.4 days)

Fuel consumption ≈ 19.67 GPH at 75% load. Estimate based on industry-typical 1800 RPM standby curves (≈0.07 GPH/kW at full load). Actual consumption varies by engine, ambient temperature, fuel quality, and tuning.

Service intervals

Manufacturer-recommended intervals for the Gillette SPVD-3500 under standby duty. Field intervals may differ based on load profile, ambient conditions, and fuel quality.

Oil & filter
Every 500 hours or 12 months
Coolant change
Every 6000 hours
Air filter
Every 1000 hours
Fuel filter
Every 500 hours
Major overhaul
20,000 hours
Load bank test
Every 12 months

Common failure modes

What we've seen fail on this platform. Use as a service-planning reference, not a diagnostic — actual failure modes depend heavily on duty cycle and maintenance history.

ComponentSymptomTypical hoursSeverity
Fuel quality / degradationInjector fouling, hard starting4,380+moderate
TurbochargerPower loss, excessive smoke under load12,000+moderate
BatteryFailed to start, slow crank8,760+minor

Frequently Asked Questions

How does the TAD1352 differ from the TAD1351 in the SPVD-3000?
Same 12.8L block, higher output calibration. The TAD1352GE produces 537 bhp at 299 psi BMEP vs. the TAD1351's 456 bhp at 254 psi. Higher turbo boost and fuel delivery push the same displacement from 300 kW to 350 kW. Same enclosure, same dimensions.
Is the SPVD-3500 130C or 120C temperature rise?
The SPVD-3500 spec sheet shows 130C rise (unlike the 120C rise on the SPVD-2500, 3000, and 4000). The higher temperature rise rating at 350 kW from 12.8L means the alternator runs slightly warmer — this is within Class H insulation limits but worth noting for installation in confined spaces.
What fuel consumption at 350 kW?
25.5 gal/hr at full load. At 75%: 19.3 gal/hr. At 50%: 13.2 gal/hr. The 12.8L produces good efficiency at this output — 350 kW from 6 cylinders is a practical sweet spot for Volvo's TAD13xx platform.

Compatible equipment

Similar models

Gillette

New

Gillette SPVD-3000

300 kW standby · Diesel · Liquid-cooled

300 kW stationary diesel standby generator with Volvo Penta TAD1351GE 12.8L engine. Stamford S4L1D alternator, Basler DGC-2020 controller. Made in USA.

Tier 33-phasecommercialhospital

Gillette

New

Gillette SPVD-4000

400 kW standby · Diesel · Liquid-cooled

400 kW stationary diesel standby generator with Volvo Penta TAD1353GE 12.8L engine. Stamford S4L1DG alternator, Basler DGC-2020 controller. Made in USA.

Tier 33-phasecommercialhospital

Blue Star Power Systems

New

Blue Star VD350-01

350 kW standby · Diesel · Liquid-cooled

350 kW Tier 3 diesel standby generator from Blue Star Power Systems. Volvo Penta TAD1352GE 12.8L inline-six with DSE DCP7310 controller, 208-600V output.

Tier 33-phasecommerciallarge-commercial

Gillette

New

Gillette T4D-3500

350 kW standby · Diesel · Liquid-cooled

350 kW Tier 4 Final / Stage 5 diesel generator with Volvo Penta TAD1385VE 12.8L engine. Water-to-air aftercooled, SCR+DEF, Basler DGC-2020. Made in USA.

Tier 4 Final3-phasecommercialhospital

Gillette

New

Gillette T4D-3000

300 kW standby · Diesel · Liquid-cooled

300 kW Tier 4 Final / Stage 5 diesel generator with Volvo Penta TAD1383VE 12.8L engine. Water-to-air aftercooled, SCR+DEF, Basler DGC-2020. Made in USA.

Tier 4 Final3-phasecommercialhospital

Gillette

New

Gillette SPVD-2500

250 kW standby · Diesel · Liquid-cooled

250 kW stationary diesel standby generator with Volvo Penta TAD852GE 7.7L engine. Stamford S4L1D alternator, Basler DGC-2020 controller. Made in USA.

Tier 33-phasecommercialhospital

Need service or parts for the Gillette SPVD-3500?

We service every major OEM and stock genuine parts for the most common models.