Blue Star Power Systems · Gaseous Product Line (PSI 32L)
New
Blue Star NG600-01P
600 kW standby / 540 kW prime · Natural Gas / LPG · Liquid-cooled
540 kW prime-rated natural gas / LP generator from Blue Star Power Systems. PSI 32L V12 turbocharged-aftercooled, DSE DCP7310 controller, three-phase 208-600V.
The Blue Star NG600-01P is the prime-rated variant of the NG600-01, delivering 540 kWe continuously on natural gas (350 kWe on LP). It uses the identical PSI 32L V12 platform and physical enclosure as the standby NG600-01. Three-phase only — no single-phase option. The NG600-01P carries a 1-year / 1,500-hour prime warranty.
Service procedures are identical to the NG600-01 standby. Prime-duty use accumulates hours faster — budget accordingly for 12-cylinder spark plug and ignition coil service intervals per PSI's prime-duty maintenance schedule.
Get pricing & lead time on the Blue Star NG600-01P
Tell us about the application — kW, voltage, application, install timeline — and we'll respond within one business day with budgetary pricing, lead time, and any sizing notes.
Adjust load percent and tank size to estimate runtime. Pre-filled with this model's spec where available.
Estimate runtime on this tank
Fuel demand at 75% load
6,300,000 BTU/hr≈ 6300.0 cf/min @ 1,000 BTU/cf
On utility natural gas the runtime is generally unlimited provided the supply line and meter can deliver this BTU/hr at the engine's required inlet pressure (typically 5–14" WC residential, up to 5 psi commercial). Confirm against the OEM's published fuel-pressure spec.
Service intervals
Manufacturer-recommended intervals for the Blue Star NG600-01P under standby duty. Field intervals may differ based on load profile, ambient conditions, and fuel quality.
Oil & filter
Every 250 hours or 12 months
Coolant change
Every 4000 hours
Air filter
Every 1000 hours
Spark plugs
Every 1500 hours
Major overhaul
≈ 15,000 hours
Load bank test
Every 12 months
Common failure modes
What we've seen fail on this platform. Use as a service-planning reference, not a diagnostic — actual failure modes depend heavily on duty cycle and maintenance history.
Component
Symptom
Typical hours
Severity
Turbocharger(s)
Significant power loss, heavy exhaust smoke
12,000+
severe
Ignition system (multi-cylinder)
Multiple misfires, output derating
1,500+
moderate
Charge air cooler
Reduced output, elevated intake temperatures
10,000+
moderate
Frequently Asked Questions
What is the prime rating of the NG600-01P?
The Blue Star NG600-01P is rated 540 kWe prime on natural gas and 350 kWe prime on LP at 60 Hz / 1800 RPM, backed by a 1-year / 1,500-hour prime warranty. The paired standby unit is the NG600-01 at 600 kWe standby NG / 400 kWe standby LP.
How does fuel consumption compare between NG600-01 and NG600-01P?
At 100% load: NG600-01 standby consumes 6,734 ft³/hr NG (600 kW); NG600-01P prime consumes 6,182 ft³/hr NG (540 kW). The reduction reflects the lower prime output. LP at 100% prime is 1,897 ft³/hr vs. 2,177 ft³/hr at standby.
What are the deration thresholds for the NG600-01P?
The NG600-01P prime uses 87°F inlet air temperature and 3,000 ft altitude as deration start points — slightly more altitude tolerance than the standby NG600-01's 2,200 ft, but the same 87°F temperature threshold. Both variants require factory consultation for conditions above these limits or LP operation.
Is single-phase output available on the NG600-01P?
No. The NG600-01P is three-phase only, in 208V, 240V, 480V, and 600V configurations.
600 kW standby · Natural Gas / LPG · Liquid-cooled
600 kW natural gas / LP standby generator from Blue Star Power Systems. PSI 32L V12 turbocharged-aftercooled, DSE DCP7310 controller, three-phase 208-600V.
650 kW standby · Natural Gas / LPG · Liquid-cooled
650 kW natural gas / LP standby generator from Blue Star Power Systems. PSI 32L V12 turbocharged-aftercooled, DSE DCP7310 controller, three-phase 208-600V.
650 kW standby · Natural Gas / LPG · Liquid-cooled
550 kW prime-rated natural gas / LP generator from Blue Star Power Systems. PSI 32L V12 turbocharged-aftercooled, DSE DCP7310 controller, three-phase 208-600V.
500 kW standby · Natural Gas / LPG · Liquid-cooled
500 kW natural gas / LP standby generator from Blue Star Power Systems. PSI 32L V12 turbocharged-aftercooled, DSE DCP7310 controller, three-phase 208-600V.
500 kW standby · Natural Gas / LPG · Liquid-cooled
450 kW prime-rated natural gas / LP generator from Blue Star Power Systems. PSI 32L V12 turbocharged-aftercooled, DSE DCP7310 controller, three-phase 208-600V.
500 kW natural-gas-only standby generator from Blue Star Power Systems. PSI 21.9LHO high-output V12 turbocharged-aftercooled, DSE DCP7310 controller, three-phase 208-600V. LP not available.