Cummins · Cummins QuietConnect RS Series

Cummins RS60

60 kW standby · Natural Gas / LPG · Liquid-cooled

60 kW liquid-cooled residential standby generator. Natural gas or LP, field selectable. 5.9L inline 6-cylinder, 1800 rpm, 69.8 dB(A) at 23 ft, 180 mph wind rated, PowerCommand 1.1 controls.

Cummins Cummins RS60 generator — specifications and details
Standby power
60 kW
Voltage options
120/240V, 120/208V, 277/480V
Frequency / Phase
60 Hz · 1/3-phase
Engine
Cummins QSJ5.9G · 5.9L
residentialsmall-commercial
Configure & Quote

Overview#

The Cummins RS60 is a 60 kW liquid-cooled residential standby generator from the QuietConnect RS Series. Powered by the QSJ5.9G 5.9-liter inline 6-cylinder engine at 1,800 rpm, the RS60 delivers 250 amps at 120/240V single phase -- enough for large estate homes, luxury residences, and properties with multiple HVAC systems, pools, and high-draw appliances.

The RS60 runs on natural gas or propane vapor (field selectable) and produces 69.8 dB(A) at 23 feet with the aluminum enclosure. The enclosure is wind-rated to 180 mph per ASCE 7-10 and the unit is equipped for cold weather starts down to -40 F with factory accessories.

At 2,634 lbs and 118.7 x 40.0 x 58.3 inches, the RS60 shares the same footprint as the RS50, RS80, and RS100 models on the 5.9L platform. PowerCommand 1.1 controls provide electronic governing, self-diagnostics, and remote monitoring capability.

Technical Specifications#

ParameterValue
Standby Rating60 kW
Voltage (1-phase)120/240V
Voltage (3-phase)120/208V, 277/480V
Frequency60 Hz
Rated Amps (1-phase, both fuels)250
Engine ModelQSJ5.9G
Displacement5.9 L
Cylinders6 (inline)
AspirationNaturally aspirated
Rated Speed1,800 rpm
CoolingLiquid-cooled
ControllerPowerCommand 1.1
Sound Level69.8 dB(A) at 23 ft (7 m)
Dimensions (L x W x H)118.7 x 40.0 x 58.3 in
Weight2,634 lbs
Wind Rating180 mph (ASCE 7-10)
Cold Weather-40 F (with factory accessories)

Our Service Experience#

The RS60 is a popular mid-range option in the 5.9L platform lineup. It provides substantially more capacity than the RS50 while maintaining the same physical footprint. For homes in the 5,000-8,000 square foot range with multiple HVAC zones, the RS60 typically provides comfortable headroom for whole-house backup.

Service is identical to the RS50 -- 500 hours or annually for oil and filter, 500 hours for air filter, 1,000 hours for all 6 spark plugs, 30,000 hours for major overhaul. The QSJ5.9G engine is well-proven and parts availability is excellent through the Cummins distributor network.

The fuel regulator / air-fuel mixer is the component that most commonly needs adjustment on 5.9L gas engines at higher hour counts. We typically see this around 15,000-18,000 hours. For residential standby units that run 50-100 hours per year, this equates to decades of service before adjustment is needed.

Frequently Asked Questions#

What is the standby rating of the RS60? 60 kW at 120/240V single phase (250 amps). Also available in 120/208V and 277/480V three-phase configurations.

How does the RS60 compare to the C60 N6? The RS60 is the residential QuietConnect version of the same 5.9L platform used in the commercial C60 N6. The RS60 comes in a residential-grade sound-attenuated enclosure with residential controls (PowerCommand 1.1), while the C60 N6 uses commercial PowerCommand controls and is typically open-set or in a commercial enclosure.

What is the warranty on the RS60? 2-year warranty from Cummins. Extended options available through authorized dealers.

Engineering specifications

Physical

Length
118.7 in
Width
40 in
Height
58.3 in
Dry weight
2,634 lb

Ready to order this model?

Configure your Cummins RS60

Lock the enclosure, fuel system, transfer switch, and add-ons — we'll confirm pricing, availability, and lead time within one business day. Prefer a free-form quote? That option is still here.

Estimate runtime for the Cummins RS60

Adjust load percent and tank size to estimate runtime. Pre-filled with this model's spec where available.

Estimate runtime on this tank

Fuel demand at 75% load

630,000 BTU/hr630.0 cf/min @ 1,000 BTU/cf

On utility natural gas the runtime is generally unlimited provided the supply line and meter can deliver this BTU/hr at the engine's required inlet pressure (typically 5–14" WC residential, up to 5 psi commercial). Confirm against the OEM's published fuel-pressure spec.

Service intervals

Manufacturer-recommended intervals for the Cummins RS60 under standby duty. Field intervals may differ based on load profile, ambient conditions, and fuel quality.

Oil & filter
Every 500 hours or 12 months
Air filter
Every 500 hours
Spark plugs
Every 1000 hours
Major overhaul
30,000 hours

Common failure modes

What we've seen fail on this platform. Use as a service-planning reference, not a diagnostic — actual failure modes depend heavily on duty cycle and maintenance history.

ComponentSymptomTypical hoursSeverity
Spark plugs (6 cylinders)Misfiring, rough idle, check engine lamp, elevated emissionsminor
Battery (12V)Fail-to-start event, slow crank, low battery voltage warningminor
Coolant level / hosesLow coolant level alarm, coolant leak, overtemperature shutdownmoderate
Fuel regulator / air-fuel mixerRich or lean condition, unstable idle or poor transient responsemoderate

Frequently Asked Questions

What engine does the Cummins RS60 use?
The RS60 uses the Cummins QSJ5.9G -- a 5.9-liter, naturally aspirated, inline 6-cylinder engine running at 1,800 rpm. This is the same engine family used in the RS50, RS60, RS80, and RS100 QuietConnect models.
How loud is the RS60?
The RS60 produces 69.8 dB(A) at 23 feet (7 meters) with the aluminum enclosure. This is quieter than the RS50 (72 dB) despite delivering more power, due to enclosure optimization.
What is the warranty on the RS60?
The RS60 comes with a 2-year warranty from Cummins. Extended warranty options are available through authorized dealers.
Can OnPoint Generators service the RS60 in Northern California?
Yes. OnPoint Generators provides Cummins generator service across the San Francisco Bay Area, Silicon Valley, and Northern California. The QSJ5.9G engine is one of the most field-common gas engines in our commercial and residential service fleet.

Similar models

Cummins Cummins RS50 50 kW liquid-cooled standby generator

Cummins

Cummins RS50

50 kW liquid-cooled standby with Cummins 5.9L inline-6 engine. Quiet 72 dB operation, automatic transfer, and PowerCommand 1.1 controls.

50 kW standby · Natural Gas / LPG · Liquid-cooled

50 kW liquid-cooled residential standby generator. Natural gas or LP, field selectable. 5.9L inline 6-cylinder, 1800 rpm, 72 dB(A) at 23 ft, 180 mph wind rated, PowerCommand 1.1 controls.

3-phaseresidentialsmall-commercial
Cummins Cummins RS80 80 kW liquid-cooled standby generator

Cummins

Cummins RS80

80 kW liquid-cooled standby with turbocharged 5.9L Cummins engine. 333 amps at 120/240V, 70.5 dB quiet operation, and PowerCommand 1.1 controls.

80 kW standby · Natural Gas / LPG · Liquid-cooled

80 kW liquid-cooled residential standby generator. Natural gas or LP, field selectable. 5.9L turbocharged inline 6-cylinder, 1800 rpm, 70.5 dB(A) at 23 ft, 180 mph wind rated, PowerCommand 1.1 controls.

3-phaseresidentialsmall-commercial
Cummins Cummins C60 N6 60 kW liquid-cooled standby generator

Cummins

Cummins C60 N6

60 kW natural gas with full Cummins vertical integration. QuietConnect-class sound levels. No diesel storage needed.

60 kW standby · Natural Gas / LPG · Liquid-cooled

60 kW natural gas/propane standby generator with Cummins QSJ5.9G 5.9L inline-6 engine. PowerCommand 1.1 control, UL 2200 listed, NFPA 110 Level 1 capable. Sound-attenuated aluminum enclosure.

EPA Stationary Spark Ignition3-phasecommercial-standbyretail

Need service or parts for the Cummins RS60?

We service every major OEM and stock genuine parts for the most common models.